• teft@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    That’s how I feel when people complain about 4k only being 30fps on PS5.

    I laugh because my 1080p tv lets the PS5 output at like 800fps.

      • Poggervania@kbin.social
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        No, the PS5 can output higher FPS at 1080p.

        What you might be thinking of is refresh rate, which yeah, even if the PS5 was doing 1080p/60fps, if you for some reason have a 1080p/30hz TV, you won’t be able to see anything above 30fps.

        • dizzy@lemmy.ml
          link
          fedilink
          arrow-up
          0
          ·
          9 months ago

          The fact it can output a 120Hz signal doesn’t mean the processor is making every frame. Many AAA games will be performing at well under 120fps especially in scenes with lots of action.

          It’s not limited to 30fps like the other poster suggested though, I think most devs try to maintain at least 60fps.

          • GooseFinger@lemmy.world
            link
            fedilink
            arrow-up
            0
            ·
            9 months ago

            Unlike Bethesda, who locks their brand new AAA games with terrible graphics at 30 fps, and that if you don’t feel that the game is responsive and butter smooth, then you’re simply wrong.

            I’d almost bet money that Todd has never played a game at 60 fps or higher.

            • Poggervania@kbin.social
              link
              fedilink
              arrow-up
              0
              ·
              9 months ago

              iirc that more has to do with lazy coding of their physics system with the Gamebryo Creation engine. From what I understand, the “correct” way for physics to work is more or less locked at 60fps or less, which is why in Skyrim you can have stuff flip out if you run it above 60fps and can even get stuck on random ledges and edges.

              There are use cases for tying things to framerate, like every fighting game for example is basically made to be run at 60fps specifically - no more and no less.

              • EldritchFeminity@lemmy.blahaj.zone
                link
                fedilink
                arrow-up
                0
                ·
                9 months ago

                This used to be the way that game engines were coded because it was the easiest way to do things like tick rates well, but like with pretty much all things Bethesda, they never bothered to try to keep up with the times.

                There’s some hilarious footage out there of this in action with the first Dark Souls, which had its frame rate locked at I believe 30fps and its tick rate tied to that. A popular PC mod unlocked the frame rate, and at higher frame rates stuff like poison can tick so fast that it can kill you before you can react.

  • ApexHunter@lemmy.ml
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    Jokes on you – I’m still using the last TV I bought in 2005. It has 2 HDMI ports and supports 1080i!

    • NarrativeBear@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      I miss this the most, older tv models would have like over 30 ports to connect anything you wanted. All newer models just have like 1 HDMI connection if even.

      To add these older screens last. New stuff just dies after a few years, or gets killed with a firmware upgrade.

      PSA: Don’t connect your “smart” appliances to the internet fokes.

      • Bipta@kbin.social
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        Is that a joke? My old TV has 3 and that’s the only reason I can still use it. 2 of them broke over the years.

        • comador @lemmy.world
          link
          fedilink
          arrow-up
          0
          ·
          9 months ago

          Depends on the TV.

          Many older mid to high end models had 4+ ports and it sucks you can rarely find a new one with 4 anymore.

          My circa 2008 Sony Bravia has 6 HDMI ports that all still work.

      • xyguy@startrek.website
        link
        fedilink
        English
        arrow-up
        0
        ·
        9 months ago

        We had an older Hitachi tv with 4 HDMI plus component plus RCA input and 4 different options for audio input.

        New Samsung TV. 2 HDMI, that’s it. One is ARC which is the only audio interface besides TOSLINK so really theres effectively 1 HDMI to use.

        But of course all the lovely spyware smart features more than make up for it.

      • poppy@lemm.ee
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        I was curious I so went and browsed some budget TVs on Walmart’s website. Even the no-name budget ones all had 3 HDMI. Maybe if it’s meant to be a monitor instead of a living room TV but I just looked at living room style TVs.

      • Dudewitbow@lemmy.zip
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        i feel like the only way youd get one with a single HDMI port are like models that were built specifically for black friday (to maximize profit, by cuting out features)

  • clearleaf@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    The performance difference between 1080p and 720p on my computer makes me really question if 4k is worth it. My computer isn’t very good because it has an APU and it’s actually shocking what will run on it at low res. If I had a GPU that could run 4k I’d just use 1080p and have 120fps all the time.

    • Chestnut@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      Tldr: Higher resolutions afford greater screen sizes and closer viewing distances

      There’s a treadmill effect when it comes to higher resolutions

      You don’t mind the resolution you’re used to. When you upgrade the higher resolution will be nicer but then you’ll get used to it again and it doesn’t really improve the experience

      The reason to upgrade to a higher resolution is because you want bigger screens

      If you want a TV for a monitor, for instance, you’ll want 4k because you’re close enough that you’ll be and to SEE the pixels otherwise.

      • Johanno@feddit.de
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        As long as don’t know that there is anything better you will love 1080p. Once you have seen 2k you don’t want to switch back. Especially on bigger screens.

        On the TV I like 1080p still. I remember the old CRT TVs with just bad resolution. In comparison 1080 is a dream.

        However if the video is that high in quality you will like 4k on a big TV even more. But if the movie is only 720p (like most DVDs or streaming Services) then 4k is worse than 1080p you need some upscaling in order to have a clear image now.

    • pishadoot@sh.itjust.works
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      1440p is the sweet spot. Very affordable these days to hit high FPS at 1440 including the monitors you need to drive it.

      1080@120 is definitely low budget tier at this point.

      Check out the PC Builder YouTube channel. Guy is great at talking gaming PC builds, prices, performance.

  • technologicalcaveman@kbin.social
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    I was using an old plasma screen from around 2008/9 for a while until my girlfriend’s sister’s exboyfriend stole it. Their dad gifted me a 55in 4k tv that wasn’t bid on at an auction he was running. That plasma is probably gonna burn down Shithead’s place at some point, it was pretty sketchy.

  • NigelFrobisher@aussie.zone
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    It’s funny that we got to retina displays, which were supposed to be the highest resolution you’d ever need for the form factor, and then manufacturers just kept making higher and higher resolutions anyway because Number Go Up. I saw my first 8K laptop around this time and the only notable difference was that the default font size was unreadable.

    • cm0002@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      It’s so funny to me, for a few hundred more you can get an android that unfolds into a tablet lol if you’re going to drop a grand on a phone why not spend a little more and get something fresh

    • Zink@programming.dev
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      Credit where it’s due, since the post was about using old devices: iPhones have consistently had some of the longest software support in the industry.

  • kandoh@reddthat.com
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    Televisions are one if the few things that have gotten cheaper and better these last 20 years. Treat yourself and upgrade.

    • Flying Squid@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      I’ve been in stores which have demonstration 8K TVs.

      Very impressive.

      I’m still fine with my 720p and 1080p TVs. I’ve never once felt like I’ve missed out on something I was watching which I wouldn’t have if the resolution was higher and that’s really all I care about.

      • jj4211@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        I think the impressive is likely more to do with other facets than the resolution. Without putting your face up to the glass, you won’t be able to discern a difference, the human visual acuity limits just don’t get that high at a normal distance of a couple of meters or more.

        I’d rather have a 1080P plasma than most cheap 4K LCDs. The demonstrators are likely OLED which mean supremely granular conrol of both color and brightness, like plasma used to be. Even nice LCDs have granular backlighting, sometimes with something like a 1920x1080 array of backlight to be close enough to OLED in terms of brightness control.

      • kandoh@reddthat.com
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        I have a 4k tv with backlighting that matches the screen. When I take magic mushrooms and watch it I can see god

    • BowtiesAreCool@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      Except they turned into trash boxes in the last couple of years. Everything is a smart TV with ad potential and functionality that will eventually be unsupported. I’m holding onto my dumb TVs as long as I can.

      • thatKamGuy@sh.itjust.works
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        We’ve got a pair of LG C1 OLEDs in the house, and the best thing we did was remove any network access whatsoever. Everything is now handled through Apple TVs (for AirPlay, Handoff etc.), but literally any decent media device or console would be an upgrade on what manufacturers bundle in.

      • voxel@sopuli.xyz
        link
        fedilink
        arrow-up
        0
        ·
        edit-2
        9 months ago

        well you can just not connect it to the internet and still have some extra features.
        also if it’s an android tv, it’s probably fine (unless you have one with the new google tv dashboard)
        these usually don’t come with ads or anything except regular google android tracking, and you can just unpin google play movies or whatnot.

      • Godnroc@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        Yup. Those cheap TV’s are being subsidized by advertisements that are built right in. If you don’t need the smart functionality, skip connecting it to the Internet. (If you can. Looking at you Roku TV’s!)

    • pedz@lemmy.ca
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      But be careful of the “smart” ones. If you have a “dumb” one that is working fine, keep it. I changed mine last year and I don’t like the new “smart” one. IDGAF about Netflix and Amazon Prime buttons or apps. And now I’m stuck with a TV that boots. All I want is to use the HDMI input but the TV has to be “on” all the times because it runs android. So if I unplug the TV, it has to boot an entire operating system before it can show you the HDMI input.

      I don’t use any “smart” feature and I would very much have preferred to buy a “dumb” TV but “smart” ones are actually cheaper now.

      Same for my parents. They use OTA with an antenna and their new smart TV has to boot into the tuner mode instead of just… showing TV. Being boomers they are confused as to why a TV boots into a menu where they have to select TV again to use it.

      New TVs may be cheap, but it’s because of the “smart” “spying” function, and they are so annoying. I really don’t like them.

      • starman2112@sh.itjust.works
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        Can’t speak for your TV, but mine takes all of 16 seconds to boot up into the HDMI input from the moment I plug it in, and there’s a setting to change the default input when it powers on. I use two HDMI ports so I have it default to the last input, but I have the option to tell it to default to the home screen, a particular HDMI port, the AV ports, or antenna

        Not a fan of the remote though. I don’t have any of these streaming services, and more importantly I’ll be dead and gone before I let this screen connect to the Internet

      • WarmSoda@lemm.ee
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        Yeah the bootup kills me. I got lucky that my current tv doesn’t do it. But man the last one I had took forever to turn on. It’s stupid.

  • Cowbee [he/him]@lemmy.ml
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    4k is the reasonable limit, combined with 120 FPS or so. Beyond that, the returns are extremely diminished and aren’t worth truly considering.

      • Cowbee [he/him]@lemmy.ml
        link
        fedilink
        arrow-up
        0
        ·
        9 months ago

        There are legitimately diminishing returns, realistically I would say 1080p would be fine to keep at max, but 4k really is the sweet spot. Eventually, there is a physical limit.

        • starman2112@sh.itjust.works
          link
          fedilink
          arrow-up
          0
          ·
          9 months ago

          I fully agree, but I also try to keep aware of when I’m repeating patterns. I thought the same thing about 1080p that I do about 4k, and I want to be aware that I could be wrong again

          • Cowbee [he/him]@lemmy.ml
            link
            fedilink
            arrow-up
            0
            ·
            9 months ago

            Yep, I’m aware of it too, the biggest thing for me is that we know we are much closer to physical limitations now than we ever were before. I believe efficiency is going to be the focus, and perhaps energy consumption will be focused on more than raw performance gains outside of sound computing practices.

            Once we hit that theoretical ceiling on the hardware level, performance will likely be gained at the software level, with more efficient and clean code.

  • arthurpizza@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    9 months ago

    I can’t really imagine being close enough to any screen where I need more than 1080p. I’m sitting across the room, not pressing my face against the glass.

  • ivanafterall@kbin.social
    link
    fedilink
    arrow-up
    0
    ·
    9 months ago

    A few years ago, I got a good deal on a 4K projector and setup a 135" screen on the wall. The lamp stopped working and I’ve put off replacing it. You know what didn’t stop working? The 10+ year old Haier 1080p TV with a ding in the screen and the two cinder blocks that currently keep it from sliding across the living room floor.

    • Domi@lemmy.secnd.me
      link
      fedilink
      arrow-up
      0
      ·
      9 months ago

      The lamp stopped working and I’ve put off replacing it.

      If you still have it, do it. Replacing the lamp on a projector is incredibly easy and only takes like 15 minutes.

      If you only order the bulb without casing it’s also very cheap.