Something like vim-table-mode work as an improvement? You got me there though, tables can be a real pain in a terminal.
For the second, I setup an on save hook or watch script to build a PDF and open it. Its been a minute, but I think I had to find a PDF viewer that would refresh if already open and keep the current position on subsequent opens.
Best of luck finding something that works for you!
Need more info.
The answer will still and always be, just use nvim.
What features do these dedicated tools have that make you want to use something other than nvim?
My work laptop is a Dell Precision. It was a “data science” model that came with Ubuntu. Wiped Dell’s modified Ubuntu and put vanilla Ubuntu on it and now running Nixos. Works great. There was a weird period when using triple monitors with their dock had an intermittent issue on boot where resolutions and monitors were not being detected. Cause was Nvidia drivers. It eventually got resolved and it was easy enough to rollback the drivers to one that worked.
Won’t auto update but you could add the upgrade command to a login script or something.
Won’t lie, nix has a high learning curve to get the most out of it, but installing a single app is pretty simple.
Most startups I’ve applied to are Linux friendly.
I currently work for a fortune 100 and managed to get a Linux machine purchased as a “lab” machine.
I’m fully in control. IT doesn’t even know it exists. I’m not allowed on the corporate network, but I managed to get some internal corporate access through another department’s lab network (IT sanctioned) that has a VPN with a few routes to things like ticketing, time cards, and our internal wiki. Most of the stuff I need to do my job is in AWS and we are allowed to add home IPs to the security groups.
IT still gives me a MacBook. I use it like once every 6 months.
nixos-unstable is the only thing I will use currently.
I’m running bleeding edge stuff like the latest kernel, Hyprland nightly, my own “shell” built from Gnome components and lots of custom stuff using GJS (Gnome JavaScript).
If you get one, and you are free to do whatever on it, encrypt your drives like your job depends on it. I have a memorized passphrase, pin protected hardware key, and a key in TPM. No biometrics.
As far as other nice things to have:
I work in software dev as FYI. For the few issues I have, my team has more issues getting stuff working consistently on macOS for our project. I used that as a justification when requesting the laptop: my dev environment should closely match our runtime environment. Most of that is moot now since we use Nix flakes in our repos for local dev envs.
Immutable Nixos. My entire server deployment from partitioning to config is stored in git on all my machines.
Every time I boot all runtime changes are “wiped”, which is really just BTRFS subvolume swapping.
Persistence is possible, but I’m forced to deal with it otherwise it will get wiped on boot.
I use LVM for mirrored volumes for local redundancy.
My persisted volumes are backed up automatically to B2 Backblaze using rclone. I don’t backup everything. Stuff I can download again are skipped for example. I don’t have anything currently that requires putting a process in “maint mode” like a database getting corrupt if I backup while its being written to. When I did, I’d either script gracefully shutting down the process or use any export functionality if the process supported it.
I use rclone and the Round Sync Android client.
Supports a ton of back ends, self hosted, and commercial options. You can transparently encrypt with private keys you control.
I personally use B2 Backblaze for storage.
My phone backs up every night and Round Sync pushes them to B2. On my desktop I can mount as a volume. I can also access my storage from my phone going the other direction.
I’ve done the same using SFTP if I don’t want the overhead of persistent file storage.
It does not support indexing or previews for searching or finding say a photo. You can put whatever you want for data. So I have caches, indexes, and thumbnails that work in Linux. I can’t really make use of those on my phone though.
Rclones bisync feature is also a bit dangerous when I tried to use it a year ago. I more than once “deleted” everything. B2 doesn’t delete by default, just hides, so I was able to recover. I now do unidirectional syncs from my machines to different buckets until I’m motivated to investigate a proper 3-way merge solution.
Oh nice! I’ll have to dig into that. Wonder if its an implementation issue across vendors. I was always under the impression that DHCPv6 was the common convention if not static.
Ok. So a device didn’t get a dhcp address? No problem… It creates it’s open IP address and starts talking and try to get out on internet on its own…
Its not that different from a conceptual point of view. Your router is still the gate keeper.
Home router to ISP will usually use DHCPv6 to get a prefix. Sizes vary by ISP but its usually like a /64. This is done with Prefix Delegation.
Client to Home Router will use either SLACC, DHCPv6, or both.
SLACC uses ICMPv6 where the client asks for the prefix (Router Solicitation) and the router advertises the prefix (Router Advertisement) and the client picks an address in it. There is some duplication protection for clients picking the same IP, but its nothing you have to configure. Conceptually its not that different from DHCP Request/Offer. The clients cannot just get to the internet on their own.
SLACC doesn’t support sending stuff like DNS servers. So DHCPv6 may still be used to get that information, but not an assigned IP.
Just DHCPv6 can also be used, but SLACC has the feature of being stateless. No leases or anything.
The only other nuance worth calling out is interfaces will pick a link local address so it can talk to the devices its directly connected to over layer 3 instead of just layer 2. This is no different than configuring 169.254.1.10/31 on one side and 169.254.1.11/31 on the other. These are not routed, its just for two connected devices to send packets to each other. This with Neighbor Discovery fills the role of ARP.
There is a whole bunch more to IPv6, but for a typical home network these analogies pretty much cover what you’d use.
I haven’t tested in Windows, but this is my setup Linux to Linux using rclone which the docs say works with Windows.
Server
Client
I use this setup for my local files and a similar setup to my Backblaze B2 off site backups.
The VFS implementation has been pretty good. You can also manually sync. Their bisync I don’t fully trust though.
I can access everything through android using https://github.com/newhinton/Round-Sync. Not great for photos though as thumbnails weren’t loading without pulling the whole file last I tested a year ago.
Some of this is a bit soft. Like, the 50% / 0% employment split says something about business’s ability to command labor. If we had an amazing economy with 50% unemployment, this would imply a large population that businesses either didn’t want or couldn’t access. And the former says something very different than the latter.
The worry for me is the “didn’t want” part. Automation is increasing throughput. The ultra wealthy are netting most of the value instead of humanity as a whole. Workers are getting laid off to keep profits increasing. Greed blocks mass access to surplus while the available job pool shrinks. Culture warfare is used as a distraction to vilify those who aren’t staying afloat as immoral leaches.
I doubt we could get to 50% without something like UBI. The unemployed would either die off due to lack of resources or a revolution happens to extract the horded wealth by force for another cycle of history. Doesn’t mean employers won’t try to min/max how much they can take.
We do not know who else may be watching.
-Gandalf
I use Nix, even on my Ubuntu machines, to install tooling in my user profile.
Nixpkgs unstable stays pretty up to date. The few I want something on release day or bleeding edge nightlies, I override the derivation source. I use nvfetcher to pull the latest release or head of the default branch as part of my update routine.
I’m pretty new to Nix, so its been slow integrating into my workflow, but I plan to start integrating flake’s into my repos. My team seems to have constant issues with keeping their tooling up to date which breaks things locally from time to time.
One method depends on your storage provider. Rsync may have incremental snapshots, but I haven’t looked because my storage provider has it.
Sometimes a separate tool like rsnapshot (but probably not rsnapshot itself as I dont think its hard links interact well with rsync) might be used to manage snapshots locally that are then rsynced.
On to storage providers or back ends. I use B2 Backblaze configured to never delete. When a file changes it uploads the new version and renames the old version with a timestamp and hides it. Rsync has tools to recover the old file versions or delete any history. Again, it only uploads the changed files so its not full snapshots.
Yes. You compose a crypted vault over your storage vault. I pay about $1/mo for B2 Backblaze. Around 150G last I checked.
Important stuff (about 150G) is synced to all my machines and a b2 Backblaze bucket.
I have a rented seed box for those low seeder torrents.
The stuff I can download again is only on a mirrored lvm pool with an lvmcache. I don’t have any redundancy for my monerod data which is on an nvme.
I’m moving towards an immutable OS with 30 days of snapshots. While not the main reason, it does push one to practicing better sync habits.
I believe you will see OOM errors in journalctl. Also considered a systemd service or something to restart the process?
Glad you figured it out though!
I use EteSync to sync my contacts. It can do calendars also and has a self-hosted option. Personally I just use Proton for my calendar at the moment.
I haven’t tested any desktop syncing with EteSync, but maybe it will work for you.
I use DavMail to proxy an Exchange account so I don’t have to install Outlook on my phone.
Let em fight it out!
Ruling class does it all the time. Keep citizens enraged on issues of race, gender, religion, sports, and so on so they are distracted from realising the one true war of ruling class vs everybody else.
/s in a sense that shit flung at the ruling class tends to role downhill. If nestle loses a bunch of money, they will raise prices to keep the infinite growth machine running. If Russia steals a bunch of money, they have more capital for weapons.
Its kind of lose/lose for us :(