• 0xD@infosec.pub
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      It takes longer but it works perfectly fine for having fresh air constantly without having the window completely open. Mine is currently opened like that and I can feel the fresh winter air 🥰

      • MonkderZweite@feddit.ch
        link
        fedilink
        arrow-up
        0
        ·
        edit-2
        7 months ago

        Where did i read this… i think it is about impact ventilation vs. always a bit open, the later wasting way more heating energy. At least, downward or sideways slant would be more effective (cold air is heavier).

        • 0xD@infosec.pub
          link
          fedilink
          arrow-up
          0
          ·
          7 months ago

          Oh yeah, I really didn’t think about it from an energy perspective, but I also never slant it when I heat. Only when it’s a little warmer, in winter I do “impact ventilate”. (What an interesting word, in German it’s “Stoßlüften”, so a very similar literal translation :D)

          Really interesting point with the mass though! I do notice active air exchange when it’s colder, however, so not sure if it would make such a difference?

  • far_university1990@feddit.de
    link
    fedilink
    arrow-up
    0
    ·
    7 months ago

    𝕯𝖎𝖊𝖘𝖊 𝕶𝖔𝖒𝖒𝖊𝖓𝖙𝖆𝖗𝖘𝖊𝖐𝖙𝖎𝖔𝖓 𝖎𝖘𝖙 𝖓𝖚𝖓 𝕰𝖎𝖌𝖊𝖓𝖙𝖚𝖒 𝖉𝖊𝖗 𝕭𝖚𝖓𝖉𝖊𝖘𝖗𝖊𝖕𝖚𝖇𝖑𝖎𝖐 𝕯𝖊𝖚𝖙𝖘𝖈𝖍𝖑𝖆𝖓𝖉

  • lugal@lemmy.ml
    link
    fedilink
    arrow-up
    0
    ·
    7 months ago

    You forgot the one where the window is fixated just in one lower corner and it looks so vulnerable and creepy at the same time

    • frezik@midwest.social
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      Double paned windows are basically standard.

      I looked at getting trippled paned windows a while back, and the benefits were marginal compared to double paned from the same company. It seems that once you’re already in the higher end of the market, they don’t do much over good double paned.

      • chrizzowski@lemmy.ca
        link
        fedilink
        arrow-up
        0
        ·
        7 months ago

        Yes, but also no. There are a bunch of other factors that contribute to a windows performance; manufacturer, type of gas used in the cavity, spacer material conductivity, thermal bridge free frame design, low e coatings and solar reflectance, and the quality of the installation matters most. Then there’s the windows efficiency relative to the rest of the assembly. If it’s a building code basic 2x4 wall from 1970 then you’re absolutely right, it would be overkill putting some triple pane krypton filled window in. But if you’ve got a foot of exterior insulation and are pushing a u value of 0.13 on your wall assembly then you need windows to match.

        Source: certified Passive House designer, the most demanding energy standard for buildings available, that originated in … yup you guessed it, Germany.

        • frezik@midwest.social
          link
          fedilink
          arrow-up
          0
          ·
          7 months ago

          I have a relatively new house (built 2006). I came to the conclusion that the extra money spent on triple paned windows would be more effectively spent on improvements elsewhere. Like a heat pump or hybrid water heater.

          In the end, we weren’t able to swing the windows at all, but did replace our crappy doors.

    • stebo@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      0
      ·
      7 months ago

      The fourth is where you accidentally put the handle diagonally and all hinges unlock except one bottom corner.